Bondloc B577 Pipe Seal 50ml
Bondloc B577 Pipe seal is a high viscosity thixotropic gel paste which cures rapidly, sealing instantly to 10 bar through its anaerobic cure. When fully cured it resists pressure up to 350 bar. B577 is not suitable for oxygen systems. Good chemical/solvent resistance to Ethanol, Motor Oil, Unleaded Petrol, Acetone and Brake Fluid.
In stock
SKU
I100-B577-50G
€18.61 ex vat
Bondloc B577 Pipe seal is a high viscosity thixotropic gel paste which cures rapidly, sealing instantly to 10 bar through its anaerobic cure. When fully cured it resists pressure up to 350 bar. B577 is not suitable for oxygen systems. Good chemical/solvent resistance to Ethanol, Motor Oil, Unleaded Petrol, Acetone and Brake Fluid.
Typical Applications are in sealing of all types of threaded connections against water, oil, gases and most common materials conveyed by pipes
When cure speed is extended due to low temperatures or inactive surfaces, activator can be used. Best results are found if B577 is applied to 2nd and 3rd threadform. Excess can be wiped away, any migration into lines will not solidify and can be flushed away during commissioning.
| Technical Features | |
| Resin | Dimethacrylate |
| Colour | Yellow |
| Cure Speed with Activator | < 10 Minutes |
| Cure Speed without Activator | < 15 Minutes at 20°C |
| Viscosity Brookfield Sp3 at 20rpm at 25°C | 24000 - 80000 cps |
| Max Thread Size | M80 |
| Flash Point | > 100°C |
| Specific Gravity | 1.09 |
| Temperature Range | -55°C to +180°C |
| Full Cure Time | 6 - 12 hours |
| Breakaway Strength | 11N.m |
| Prevailing Torque | > 3 to < 9 N/mm2 |
| Static Shear Strenth | > 5 to < 15 N/mm2 |
| Brand | NA |
|---|---|
| Type | B577 |
